Multicoupler HC-UHF-2

Use Case Example

2-Channel UHF Transmit Combiner & Receive Amplifier

2 Channel Transmit with TX-TX Isolation
2 Channel Receive with up to 20dB Gain
Immediately Deployable on Simple Site Licence

2 Channel UHF

3-Channel UHF

4-Channel UHF

Multicoupler HC-UHF-2 is a 2-channel UHF TX/RX antenna combiner designed to allow two UHF repeaters to share a single antenna. Designed in the UK, the HC-UHF-2 delivers adequate TX-RX and TX-TX separation in a compact 2U rack-mount chassis. HC-UHF-2 can be deployed immediately using any 2 of 5 repeater frequencies from the immediately available Ofcom Simple Site Licence, or re-tuned to any frequency between 450 and 470 MHz with 5.5-10 MHz channel separation (wider separation "Model 2" is available by special order).

HC-UHF-2 Block Diagram

Innovative Engineering

Multicoupler HC-UHF-2 uses a bandpass duplexer, meaning only the intended signals pass through the combiner.

Custom designed dual stage transmit isolators ensure maximum TX-TX isolation and minimal intermodulation.

A high gain low noise amplifier (LNA) offsets insertion losses, ensuring receiver sensitivity is maintained, even when split 2 ways.

Designed for Shared Antenna Systems

Multicoupler HC-UHF-2 is a 2-channel hybrid TX/RX combiner, meaning it manages both transmit and receive in a single unit.

This allows two repeaters operating on adjacent frequencies to safely share one antenna while maintaining clean signal separation paths and stable operation.

Carefully engineered, the HC-UHF-2 minimises any de-sense and intermodulation between channels - making it ideal for 2 repeater installations.

Also available: 3 and 4 channel versions.

At a Glance

Combine two UHF repeaters into one antenna with minimal loss.
High TX-TX isolation (≥ 65 dB) for reduced intermodulation.
Integrated RX low noise amplifier to overcome combiner losses.
Wide UHF coverage (450–470 MHz) for maximum flexibility.
Wider separation and lower frequency version "Model 2" is available by special order.
Stylish and compact 2U rack-mount design for easy, neat and tidy installation.
12V DC powered – ideal for fixed sites or backup power systems
Cost-effective alternative to traditional cavity-based systems

Multicoupler HC-UHF-2 offers an ideal balance of performance, simplicity, and affordability. Designed for low to medium power multi repeater systems, HC-UHF-2 delivers adequate isolation and reliability. For two-channel sites looking to reduce antenna count, cable runs, and overall system cost, the HC-UHF-2 is a smart, space-efficient solution.

Immediately Deployable Ofcom Simple Site Repeater Frequencies

Did you know? In the UK, there is an Ofcom Simple Site Licence available for any UK based organisation and is instantly issued, allowing a 1-5 channel low power repeater system to be installed without any delay.

With that in mind, Multicoupler has designed and pre-tuned the HC-UHF-2 to cover the below Ofcom Simple Site repeater frequencies right out the box, allowing the engineer to chose any 2 of the below Ofcom Simple Site Repeater frequencies and deploy a 2 channel system immediately.

Please note: All HC series UHF combiners can be tuned to any frequency between 420 and 470 MHz.

Channel 1

451.51250

458.51250

Channel 2

451.52500

458.52500

Channel 3

451.53750

458.53750

Channel 4

451.55000

458.55000

Channel 5

451.56250

458.56250

Technical Information

Channels

Tuneable Range

Pre-Tuned TX

Pre-Tuned RX

TX/RX Separation

Insertion Loss

RX Gain

Max Combined Power

HC-UHF-2

420 - 470 MHz

451.5 MHz (± 3 MHz)

458.5 MHz (± 3 MHz)

5.5 - 30 MHz

≥ 75 dB

≤ 5.5 dB

≥ 20 dB

100 W

HC-UHF-3

420 - 470 MHz

451.5 MHz (± 3 MHz)

458.5 MHz (± 3 MHz)

5.5 - 30 MHz

≥ 75 dB

≤ 6.8 dB

≥ 20 dB

150 W

HC-UHF-4

420 - 470 MHz

451.5 MHz (± 3 MHz)

458.5 MHz (± 3 MHz)

5.5 - 30 MHz

≥ 75 dB

≤ 8.2 dB

≥ 20 dB

150 W

Downloads

Google Sites

Report abuse